Climbing Wall above hinge is 12’W x 12’H (Kilter standard)
Kick Board Base below hinge is 144.5” wide and 36” high -18” of depth required for stabilizing gussets.
172” of clear height required when the wall is at 20 degrees.
1.5 feet (18 inches) of depth required for stabilizing gussets.
12 feet (144 inches) of width required for installation.
Minimum of 14 to 16 feet (168 to 192 inches) of fall zone width and depth suggested.
Adjusts from 20 to 70 degrees.
OG hand crank or Electric hoist options available.
Bolts to a structural floor and hangs from a structural wall or beam.
Requires consultation with licensed contractor prior to installation.
Russian Birch Panels
Precision engineered with patents pending.
Just like our Master Wall, the Grandmaster mounts to two points into a structural concrete wall or header beam in a bearing wall. Always consult with your architect, engineer or licenced contractor and refer to our Facilities Requirements Document.
We recommend 16x16 feet deep for safety. Jumping laterally can send a climber falling away from the wall. 12" thick is recommended.